iXtreme LT+ Lite Touch Xbox 360 Drive Firmware Flashing
Page 1 of 8 123 ... LastLast
Results 1 to 10 of 71
Like Tree5Likes

Thread: Disc not supported with LT3

  1. #1
    A Helping Hand
    Join Date
    Jan 2012
    Location
    London
    Posts
    20
    Thanks
    3
    Thanked 1 Time in 1 Post

    Disc not supported with LT3

    Hi everybody,


    After my xbox died suddenly just before christmas, I bought an another one on ebay.
    I went directly flashed it, we tried a back up (dead island) with the guy, and all seems to work fine.

    I asked some questions to this guy, like if it was safe to do the last update (dashboard 14699), and he told me that it was ok, and i could do it.

    When I went home, I did the update, tried some games, and not all the games worked (the xgd3 didn't seems to work, but the old ones did).
    I contacted the guy who flashed the console, and he told me to use abgx to patched the games.

    This afternoon, i wanted to try again, and suddenly all my games works but not the ones with ap25 (Assassin's Creed Brotherhood, and NFS Hot pursuit). I tried all my afternoon with abgx to make it works but didn't get it.

    This evening I tried to connect my xbox (never use xbox live, don't have an account and don't want one), to just connect my laptop. I just tried like 1 or 2minute, and never use any xbox live account (it seems connected to it but without account is that possible?).
    Now I don't know why and how exactly but NONE OF MY GAMES WORKS.

    I don't know what happened, is anyone have an idea?
    My dashboard is 14699, and the guy who flashed the console told me that its was LT3 firmware.

    I've read some of the posts, and i'm afraid that the console have been banned by his previous owner.
    Could it be it?
    And if the console is banned, can i still play my games and how?

    I hope i find an answer here

    Thank you for anyone who'll answer me.
    Cassi

  2. #2
    Legend
    Join Date
    Oct 2011
    Location
    England
    Posts
    1,362
    Thanks
    30
    Thanked 134 Times in 130 Posts
    Oh boy I can't believe you asking this question... re-patch your back-ups through ABGX 1.6 and re-burn using a IHas 124-19b drive or above b model thats flashed with LT Burner Max FW then run your back-up through Kprobe 2 and compare your results against the recommended ones in my sig.


    USE THE BLOODY SEARCH BAR! FFS
    iXtreme sucks ass and licks donkey dicks

  3. #3
    A Helping Hand
    Join Date
    Jan 2012
    Location
    London
    Posts
    20
    Thanks
    3
    Thanked 1 Time in 1 Post
    Thanks a lot!

    I did search like for a day, but there are a lot of stories and there are all different, and not all the answers are that clear.
    Thanks again.

    I did all that you've told me, and I received the burner (ihas124b) yesterday, so i flashed it, patched my games with abgx (no errors), burned it (with the help of the post "how-i-burn-check-xgd3-using-imgburn-2-5-6-0-kprobe-2" for the settings) and checked with kprobe.The first didn't passed, but the second should have, see the results :

    Date : 26/01/2012 18:01:59
    Model : 1-0-1-0 ATAPI iHAS124 B AL0S
    Disc : DVD+R DL , MKM003 [Mitsubishi Chemical Corporation]
    Speed : 4x
    ECC blocks sum (PI/PIF) : 8/1
    Scanned range : 0 - 4267012
    Sampling count : 247275
    Errors : 0
    PI Max : 51
    PI Average : 1,39
    PI Total : 43412
    PIF Max : 4
    PIF Average : 0,17
    PIF Total : 5431

    But now, i've got the message "disc unreadable".
    Do you what should I do?

    Thanks again
    Cassi

  4. #4
    Xtreme Helper
    Join Date
    Nov 2010
    Posts
    128
    Thanks
    10
    Thanked 5 Times in 3 Posts
    Got to admit, pretty poor finding any help on here recently. Pretty much have search the forums using keywords. Admin, conform and sort the top q and a's

  5. #5
    Legend
    Join Date
    Oct 2011
    Location
    Winchester, U.K.
    Posts
    2,711
    Thanks
    41
    Thanked 360 Times in 355 Posts
    Quote Originally Posted by cassilia View Post
    Thanks a lot!

    I did search like for a day, but there are a lot of stories and there are all different, and not all the answers are that clear.
    Thanks again.

    I did all that you've told me, and I received the burner (ihas124b) yesterday, so i flashed it, patched my games with abgx (no errors), burned it (with the help of the post "how-i-burn-check-xgd3-using-imgburn-2-5-6-0-kprobe-2" for the settings) and checked with kprobe.The first didn't passed, but the second should have, see the results :

    Date : 26/01/2012 18:01:59
    Model : 1-0-1-0 ATAPI iHAS124 B AL0S
    Disc : DVD+R DL , MKM003 [Mitsubishi Chemical Corporation]
    Speed : 4x
    ECC blocks sum (PI/PIF) : 8/1
    Scanned range : 0 - 4267012
    Sampling count : 247275
    Errors : 0
    PI Max : 51
    PI Average : 1,39
    PI Total : 43412
    PIF Max : 4
    PIF Average : 0,17
    PIF Total : 5431

    But now, i've got the message "disc unreadable".
    Do you what should I do?

    Thanks again
    Cassi
    Re check the firmwware on the 360's drive!

    And a banned console is banned for online use and should still play games so long as you pull the lan cable out or dis-able wifi if its a slim.
    Last edited by TFi1969; 01-26-2012 at 12:47 PM.

  6. #6
    Legend
    Join Date
    Dec 2011
    Location
    Connecticut, USA
    Posts
    4,841
    Thanks
    192
    Thanked 321 Times in 312 Posts
    Quote Originally Posted by cassilia View Post
    Thanks a lot!

    I did search like for a day, but there are a lot of stories and there are all different, and not all the answers are that clear.
    Thanks again.

    I did all that you've told me, and I received the burner (ihas124b) yesterday, so i flashed it, patched my games with abgx (no errors), burned it (with the help of the post "how-i-burn-check-xgd3-using-imgburn-2-5-6-0-kprobe-2" for the settings) and checked with kprobe.The first didn't passed, but the second should have, see the results :

    Date : 26/01/2012 18:01:59
    Model : 1-0-1-0 ATAPI iHAS124 B AL0S
    Disc : DVD+R DL , MKM003 [Mitsubishi Chemical Corporation]
    Speed : 4x
    ECC blocks sum (PI/PIF) : 8/1
    Scanned range : 0 - 4267012
    Sampling count : 247275
    Errors : 0
    PI Max : 51
    PI Average : 1,39
    PI Total : 43412
    PIF Max : 4
    PIF Average : 0,17
    PIF Total : 5431

    But now, i've got the message "disc unreadable".
    Do you what should I do?

    Thanks again
    Cassi
    Cassi did you run your iso through abgx360 1.0.6 to patch it? What DVD drive do you have and what LT+ FW do you have running? Also can you post screen shots of your various abgx360 settings?

  7. #7
    Legend
    Join Date
    Oct 2011
    Location
    Winchester, U.K.
    Posts
    2,711
    Thanks
    41
    Thanked 360 Times in 355 Posts
    Quote Originally Posted by spaz2203 View Post
    Cassi did you run your iso through abgx360 1.0.6 to patch it? What DVD drive do you have and what LT+ FW do you have running? Also can you post screen shots of your various abgx360 settings?
    He's been told that he has LT3.0 and he's on 14699, so all should be peachy for his older games and he will just need to repatch the AP ones and burn them again.

  8. #8
    Legend
    Join Date
    Dec 2011
    Location
    Connecticut, USA
    Posts
    4,841
    Thanks
    192
    Thanked 321 Times in 312 Posts
    i just want to make sure cassi is using abgx360 1.0.6 because they said they patched the games and they still dont work despite having been re-patched. Anyone think it could be a weak laser?

  9. #9
    A Helping Hand
    Join Date
    Jan 2012
    Location
    London
    Posts
    20
    Thanks
    3
    Thanked 1 Time in 1 Post
    TFI1969 :

    I don't know how to check it.
    The guy who flashed told me it was the LT3 but i don't know.
    I can post what i see on the console :
    D: 2.0.14699.0 K:2.0.14699.0 (BK:2.0.1888.0)

    This is it?

    This is a slim, yes.

  10. #10
    Legend
    Join Date
    Dec 2011
    Location
    Connecticut, USA
    Posts
    4,841
    Thanks
    192
    Thanked 321 Times in 312 Posts
    nope thats not abgx360...

    also ask if he disconnected the laser or not when he flashed it.

 

 
Page 1 of 8 123 ... LastLast

Similar Threads

  1. I'm still getting Disc not supported on LT+ 3.0
    By Ash Flash in forum iXtreme LT+ Lite Touch Firmware Phat Support
    Replies: 8
    Last Post: 12-25-2011, 04:47 PM
  2. Disc is Not Supported
    By grandpapolly in forum 360 Backups
    Replies: 2
    Last Post: 12-11-2011, 12:27 PM
  3. Disc is not supported?
    By cindylo in forum iXtreme LT+ Lite Touch Firmware Phat Support
    Replies: 7
    Last Post: 11-19-2011, 08:04 PM
  4. This disc is not supported
    By Th4 Produca in forum Open Forum
    Replies: 3
    Last Post: 11-16-2011, 10:17 PM
  5. Disc not supported lt 2.0
    By Vizip in forum Open Forum
    Replies: 0
    Last Post: 11-16-2011, 08:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Back to top
1e2 Forum